Linearantrieb 24 V 8000N min. 328 max. 478 Hub 180mm MSE47

Spannung: DC 24 V
Leistung: 50 W
Schubkraft: 6000N
Geschwindigkeit: 4-12 mm/s
Umgebungs Temperature: -10° +45° C
Luftfeuchtigkeit: 20%- 80%
Schutzklasse: IP54
Stecker: Abgewinkelt
Hublänge: 150 mm:
Maximale Länge: 478 mm
Minimale Länge: 328 mm

Elektrische Linearantriebe werden durch eine niedrige Gleichspannung von einer Steuereinheit betrieben.
Der Strom wird in eine lineare Bewegung umgewandelt.
Drei Komponenten werden für den Betrieb benötigt:
1 Motor (Linearantrieb)
1 Controlbox (Steuereinheit)
1 Handbedienung oder Fussbedienung


Features:
24V DC permanent magnet motor
Thrust up to 8000 N in push and up to 6000 N in pull
Color: grey
Standard protection class: IP54
Stainless steel pipe with inner tube
Low noise; The average noise level is lower than 48dB(ambient noise is less than 40dB).
Built-in electronic limit switches
High-strength front and back fixtures
Certificate : CE,UL60601-1,IEC60601-1


Usage:
Ambient temperature: +5 º to +40 º
Duty cycle: Max 10% or 2 minutes continues use followed by 18 minutes not in use

Comments to table :
The above measures are made in connection with 24V DC stabilized voltage supply.
JIECANG control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) are not running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a JIECANG control box, the terminals of the motor must be short-circuited to achieve the self-locking ability of the actuator.
When the load in push is above 8000N, the max. stroke length is 400mm.